A traditional full bodied cut thread round or dome head woodscrew with a slot drive, made from solid silicon bronze - designed to finish above the surface of your timber/hardware.
Silicon bronze has a rose gold patina when new or polished. If allowed to age, it will develop a red hued brown tone, akin to Florentine bronze, and is the recommended option for fastening Florentine bronze hardware.
Screw Size Chart - Gauge: 6g
| Head Diameter: | 6.4mm |
| Head Height: | 2.4mm |
| Shank Diameter: (major) | 3.4mm |
| Shank Diameter: (minor) | 2.3mm |
| Finish: | Mill Finish |
| Material: | Solid Silicon Bronze |
| Major Pilot Hole: | 3mm |
| Pilot Hole Hardwood: | 2mm |
| Pilot Hole Softwood: | 2mm |
| Length: | 25mm - 1" |
Applications
| Wooden Boats | Exterior use |
| Fine Woodwork | Ultimate Corrosion Resistance |
| Inert in caustic timbers | Suitable for harsh environments |
| Renovations | Decking |
| Heritage Restoration | Cladding |
| Florentine Bronze fittings | Roofing |
| Western Red Cedar Cladding | Timber Shingles |
| Joinery | Coastal Dwellings & Beach houses |
| Cabinet Making | Building & Construction |
| Door Hinges | Copper Roofs |
| Non-magnetic | Docks, Wharfs & Boardwalks |
How to measure this fastener:
| Head Diameter | Measured across the outside of the head at the widest point |
| Major Shank Diameter | Measured on the plain shank below the head |
| Minor Shank Diameter | Measured on the shank between the threads at tip |
| Length | Measured from the underside of the head to the tip |
